Main Product Tab

  Gate Selection  

COURION gates are available for either power or manual operations, and can be furnished in wire mesh or solid panel construction.

COURION wire mesh gates are fabricated of 10 gauge round wire formed in a 1-3/8” (34mm) mesh, crimped in both directions and welded into a tubular steel frame. Note: 3/8” (9mm) mesh is available when required.

Standard gates are 6’-0” (1830mm) high. Full height gates are also available.

COURION car gates are finished in factory standard gray primer. They can also be finished with air dry enamel or constructed of stainless steel.

Solid Panel gates are furnished standard in 18 gauge mild steel, prime painted. They are also available with air dry enamel finish or constructed of stainless steel.


Single Section Gate
(Plan View)

      Two Section Compound Gate
(Plan View)
      Two Section Ratio Gate
(Plan View)
The Power To Move
Site Map
(800) 533-5760
or (314) 533-5700

Copyright ©2018 COURION
All rights reserved

3044 Lambdin Ave.
St. Louis, Missouri 63115