Main Product Tab

                   
 

Cycle of Operation -
Clean Lift (typical)

 
                   
 

Automatic Load & Unload (typical)

1. When a cart is in the proper position at the Service Level, a light above the door entrance will illuminate the “Cart READY” light and automatically enter a call for the lift.

2. Upon arrival of the car a flashing light and audible signal will sound and the hoistway doors and car gate will automatically open simultaneously.

3. The Cart-Matic© unit will automatically extend from the car, engage the cart, and pull the cart into the car.

4. When the cart is in the proper position inside the Car as determined by the Cart ON Sensor, a flashing light and audible signal will sound prior to and during the automatic sequential closing of hoistway doors and car gate.

5. Upon arrival of the car at the dispatch level a flashing light and audible signal will sound and the hoistway doors and car gate will automatically open simultaneously.

6. The Cart-Matic© unit will automatically extend from the car and unloads the cart.

7. Lobby Full Sensors are used to detect the presence of more than two (2) additional carts in the Lobby. If the Lobby is full, an audible and light warning will be activated. The hoistway doors and car gate will remain open and the Cart-Matic© unit will not extend until the Lobby Full condition is remedied.

8. After ejecting the cart, a flashing light and audible signal will sound as the Cart-Matic© unit retracts into the car and during the automatic sequential closing of the hoistway doors and car gate.

9. The arrival lantern remains lighted until the car leaves the dispatch floor.

10. The car automatically returns to the Service Level, ready to begin the next dispatch cycle. The next dispatch may be registered as soon as (but not before) the loaded car leaves the Service Level.

 
                   
 

Automatic Return (typical)

1. When a cart is in the proper position at a Level other than the Service Level, a light above the door entrance will illuminate the “Cart READY” light and automatically enter a call for the lift.

2. Upon arrival of the car a flashing light and audible signal will sound and the hoistway doors and car gate will automatically open simultaneously.

3. The Cart-Matic© unit will automatically extend from the car, engage the cart, and pull the cart into the car.

4. When the cart is in the proper position inside the Car as determined by the Cart ON Sensor, a flashing light and audible signal will sound prior to and during the automatic sequential closing of hoistway doors and car gate.

5. Upon arrival of the car at the Service Level a flashing light and audible signal will sound and the hoistway doors and car gate will automatically open simultaneously.

6. The Cart-Matic© unit will automatically extend from the car and unload the cart.

7. Lobby Full Sensors are used to detect the presence of more than two (2) additional carts in the Lobby. If the Lobby is full, an audible and light warning will be activated. The hoistway doors and car gate will remain open and the Cart-Matic© unit will not extend until the Lobby Full condition is remedied.

8. After ejecting the cart, a flashing light and audible signal will sound as the Cart-Matic© unit retracts into the car and during the automatic sequential closing of the hoistway doors and car gate.

9. The arrival lantern remains lighted until the car leaves the dispatch floor.

10. The car automatically returns to the Return Level ready to begin the next Return cycle. The next return may be registered as soon as (but not before) the loaded car leaves the Return Level.

 
                   
ONE COMPANY | So Many Options
     
     
 
Site Map
   
(800) 533-5760
or (314) 533-5700

Copyright ©2012 COURION
All rights reserved

3044 Lambdin Ave.
St. Louis, Missouri 63115